Compac Ice Gold

Compac Ice Gold

Compac’s Ice Gold worktop is an elegant addition to the Genesis range of original worktop designs. The surface features a warm off-white background with striking golden veins that evoke the frozen lakes of the Arctic, as envisioned by designer Arik Levy. The jagged pattern creates a stunning look, making it an ideal centerpiece for any kitchen design that values both beauty and practicality.

View the full slab image

Compac technological quartz is a combination of 93-95% pure quartz minerals and 5-7% polymer agglomerate in a high-quality polyester or natural resin and 1% pigment. Quartz is one of the hardest minerals known to man and gives COMPAC worktops outstanding levels of abrasion and scratch resistance. We are approved fabricators for Compac surfaces and a limited lifetime warranty is available when installed by our fitters and registered with Compac.

Joints
All joints are finished with a small ariss to the top edge and are carefully sealed with silicone to allow for expansion and to prevent water seeping through or bacteria growing in cavities.

Tolerance in quartz worktops is ±2mm

Heavily Veined / Particulated Colours
These colours are highly unlikely to have contineous flow of the pattern when 2 sheets or 2 pieces of the same sheet are seamed together. The change of pattern will show up on the seam area

Thermal Expansion
Due to thermal expansion Quartz can expand up to 1mm per meter

Overhangs & Support
Any overhang extending more than 300mm should be supported and carcasses should be 600mm spacing
Due to the weight of quartz worktops, it is essential that your units are level and securely fixed.

Cutouts for Hobs, Sinks, etc
Sink cutouts are placed a minimum 50mm from the worktop front edge
A minimum of 120mm is required between two hob cut outs.
A minimum of 100mm is required between hob and sink cut outs.
A minimum of 70mm is required between two sink cut outs.
If a waste disposal unit is fitted to an undermounted sink after installation, additional support will be required, otherwise your warranty may be invalidated.

Stainless Steel Sinks
Carefully select your preferred method of undermounting stainless steel sinks to ensure sufficient support.
When the plumbing is done to the sink, it is important that the plumber reseals it with silicone, otherwise water may seep through the gap and your warranty may be invalidated

Upstands
Upstands less than 100mm high are extremely fragile and are not recommended.
Upstands are not normally cut from the same slab as the worksurfaces and therefore an exact colour match is not possible.
Because quartz upstands are straight and rigid, gaps will be visible if there are any imperfections or variations on the wall profile. To cover these gaps between the wall and the upstands, it is recommended that plastering or tiling be completed after the worktop installation.

Care and Maintenance
Bluestone offer a Care and Maintenance Kit which has been developed to offer the customer everything they need to keep their worktops looking good for years to come

Scratches
Quartz worktops are not scratch proof, the use of chopping boards is recommended. Dark, heavily pigmented colours will show scratches, wear and tear more easily.

Hygienic
Quartz worktops are naturally hygienic as it is non-porous and do not harbour germs

Key Features

Tough

Quartz is one of the hardest minerals in the world. This makes our products very durable, with a high level of resistance to external aggressions

Easy to Clean

With a non-porous surface that prevents dirt and stains from penetrating the material.

Non-Porous

Bacteria and mould have nowhere to take root. When it looks clean, it really is clean

Durable

Proven to be remarkably durable, a versatile material that is easy to live with in both domestic and commercial environments

Material Type

Quartz

Brand

Compac

Price Band

Band 6

Thickness

20mm, 30mm

Jumbo Slabs Available

Only Jumbo Sheets Available

Colour

White, Gold

Style

Veined

Surface Finish

Polished

Compac Ice Gold

Compac Ice Gold

Compac’s Ice Gold worktop is an elegant addition to the Genesis range of original worktop designs. The surface features a warm off-white background with striking golden veins that evoke the frozen lakes of the Arctic, as envisioned by designer Arik Levy. The jagged pattern creates a stunning look, making it an ideal centerpiece for any kitchen design that values both beauty and practicality.

View the full slab image

Compac technological quartz is a combination of 93-95% pure quartz minerals and 5-7% polymer agglomerate in a high-quality polyester or natural resin and 1% pigment. Quartz is one of the hardest minerals known to man and gives COMPAC worktops outstanding levels of abrasion and scratch resistance. We are approved fabricators for Compac surfaces and a limited lifetime warranty is available when installed by our fitters and registered with Compac.

Joints
All joints are finished with a small ariss to the top edge and are carefully sealed with silicone to allow for expansion and to prevent water seeping through or bacteria growing in cavities.

Tolerance in quartz worktops is ±2mm

Heavily Veined / Particulated Colours
These colours are highly unlikely to have contineous flow of the pattern when 2 sheets or 2 pieces of the same sheet are seamed together. The change of pattern will show up on the seam area

Thermal Expansion
Due to thermal expansion Quartz can expand up to 1mm per meter

Overhangs & Support
Any overhang extending more than 300mm should be supported and carcasses should be 600mm spacing
Due to the weight of quartz worktops, it is essential that your units are level and securely fixed.

Cutouts for Hobs, Sinks, etc
Sink cutouts are placed a minimum 50mm from the worktop front edge
A minimum of 120mm is required between two hob cut outs.
A minimum of 100mm is required between hob and sink cut outs.
A minimum of 70mm is required between two sink cut outs.
If a waste disposal unit is fitted to an undermounted sink after installation, additional support will be required, otherwise your warranty may be invalidated.

Stainless Steel Sinks
Carefully select your preferred method of undermounting stainless steel sinks to ensure sufficient support.
When the plumbing is done to the sink, it is important that the plumber reseals it with silicone, otherwise water may seep through the gap and your warranty may be invalidated

Upstands
Upstands less than 100mm high are extremely fragile and are not recommended.
Upstands are not normally cut from the same slab as the worksurfaces and therefore an exact colour match is not possible.
Because quartz upstands are straight and rigid, gaps will be visible if there are any imperfections or variations on the wall profile. To cover these gaps between the wall and the upstands, it is recommended that plastering or tiling be completed after the worktop installation.

Care and Maintenance
Bluestone offer a Care and Maintenance Kit which has been developed to offer the customer everything they need to keep their worktops looking good for years to come

Scratches
Quartz worktops are not scratch proof, the use of chopping boards is recommended. Dark, heavily pigmented colours will show scratches, wear and tear more easily.

Hygienic
Quartz worktops are naturally hygienic as it is non-porous and do not harbour germs

Key Features

Tough

Quartz is one of the hardest minerals in the world. This makes our products very durable, with a high level of resistance to external aggressions

Easy to Clean

With a non-porous surface that prevents dirt and stains from penetrating the material.

Non-Porous

Bacteria and mould have nowhere to take root. When it looks clean, it really is clean

Durable

Proven to be remarkably durable, a versatile material that is easy to live with in both domestic and commercial environments

Material Type

Quartz

Brand

Compac

Price Band

Band 6

Thickness

20mm, 30mm

Jumbo Slabs Available

Only Jumbo Sheets Available

Colour

White, Gold

Style

Veined

Surface Finish

Polished

Related Colours